1. Home
  2. Industries Served
  3. Retail

Retail

IT support for retail businesses

We work with retail businesses across Acadiana and the rest of Louisiana. A store has one hard requirement, which is that the register takes money, and most of the technology decisions follow from that. Support is hourly and the technicians come to you.

E Solution Group emblem in blue glass beside a frosted glass shopping bag

The register is the business

Everything else can wait an hour. That cannot.

In most offices an outage is expensive later. In a store it is expensive immediately, in front of a customer who is holding something and deciding whether to keep waiting. That changes the order of the work: the payment path gets designed first and everything else is arranged around it.

Stores ask us about the point of sale bill more often than about the point of sale. Usually the advice is to stay, because the merchant who built the system is the fastest way back to taking money when the registers stop. When one has genuinely stopped earning its keep we have moved stores onto a new system, and we have repaired the old ones for years. Cloud, on premise, or reached through a VPN has not made much difference. We have not yet met one we could not work on.

Two women looking at a tablet on a stand at the wooden counter of a clothing shop

Behind the counter before the doors open

Register work gets done before opening, because the alternative is doing it in front of a customer holding something. A technician checks that the card reader holds its connection, that the receipt printer answers, and that the payment side of the store sits on its own network.

Terminals, readers and cabling need somebody in the store. Software, accounts and mail are faster over a remote session, and we start there when we can. Retail work is $150 an hour billed for the hours worked, no contract, and asking costs nothing.

What actually goes wrong

What breaks in a store

  • 01

    The register during trading hours

    A point of sale that depends on one connection has one way to fail, and it fails at the worst moment.

  • 02

    Card payments sharing a network with everything else

    Payment equipment belongs on its own segment, separated from the office machines and from anything a customer can join. Your card processor will ask you about this, and it is worth being able to answer.

  • 03

    Customer wireless

    Guest access is a service you offer, and it should have no path to the back office at all.

  • 04

    Cameras and back office on the same wire

    Recording equipment quietly consumes the connection the registers need, and nobody notices until a busy Saturday.

  • 05

    Inventory devices out on the floor

    Handhelds and scanners roam, so coverage across the whole floor is a measurement job rather than a matter of adding another access point.

A practical first step

See what an assessment finds in a retail store

Tell us what is happening and we will say whether it is a scoped job, an hourly visit, or nothing to worry about.

What we do here

The work we get called for

Retail calls are usually about coverage on the floor or about a register that stopped. Both start with measuring what is actually there.

A technician plugging a blue cable into an open wall mounted network cabinet full of patch leads

The back room, where the network lives

Behind the sales floor there is usually a shelf holding everything at once: the modem, a switch, the router a previous vendor left, and a tangle nobody has touched since. It is where register traffic, the office computer and the guest wireless all meet, which makes it worth a proper look.

Sorting it out means labelling what is there, retiring what is dead, and putting the payment side on its own network instead of sharing one with everybody's phone. Sentry then watches those machines and reports what it sees, so a slow failure shows up as a pattern rather than a bad Saturday.

Questions retailers ask

Our card processor asked whether payments are on a separate network. What does that mean?

It means the equipment that handles cards should not be reachable from the machines that do everything else, and definitely not from customer wireless. It is a network design question, not a paperwork question, and we can look at what you have and tell you where it stands. We do not sell certification and we are not a compliance shop.

Can you keep the registers running if the internet drops?

That depends on the point of sale you use, and it is worth finding out before it happens rather than during. We look at what your system does offline, then design around the answer. Sometimes that is a second connection and sometimes it is a setting nobody had turned on.

Should we switch point of sale systems?

Usually not because of the monthly bill on its own. The merchant who built the system is the fastest way back to taking money when the registers stop, and that specialty is worth paying for. We sell no contract IT and we are still telling you to keep paying for that one, which is not a contradiction: a contract is judged on what it delivers, and that one delivers. When a system has genuinely stopped earning its keep we move stores onto a new one, and we have repaired point of sale systems for years. We do not sell a point of sale and we are not tied to a brand, so we have no reason to tell you that yours is the problem.

Start here

Tell us what the store runs on

Name the point of sale, say where the registers and the cameras plug in, and tell us where coverage drops on the floor. We will come and measure it.